vc2, vc3 vcxo series 6 pad leadless surface mount voltage controlled xtal oscilla tor cmos/ ttl compatible (vc2 without e/d, vc3 with e/d) standard specifications overall frequency stability 15, 25, 50, 100 ppm over operating temperature range operating temperature range 0 to +70 c is standard, but can be extended to - 40 to +85 c for certain frequencies supply voltage (vcc) 5.0 volts and 3.3 volts available output load std load is 15pf max., see test circuit 7 for vc2, tc 8 for vc3 (consult factory for heavier loads) control voltage range (cvr) 0.5 to 4.5 volts for 5.0 volt supply; 0.3 to 3.0 volts for 3 .3 volt supply pullablity over cvr 25, 50, 100, 150, 200 ppm. consult factory for 300 ppm. linearity 10% (consult factory for 5%) supply current icc (ma) rise and fall time tr & tf (ns) frequency range (mhz) typical maximum typical maximum 1.500 ? 20.000 10 15 3.5 5.0 20.001 ? 30.000 20 25 3.0 4.5 30.001 ? 50.000 25 30 3.0 4.0 50.001 ? 60.000 30 35 2.5 3.5 part numbering guide model frequency stability frequency in mhz frequency deviation (pullability) over cvr 3 vc22h 100 a z - 60.0m consult factory for available frequencies and specs. not all options available for all frequencies. a special part numbe r may be assigned. t: 25 ppm v: 50 ppm w: 100 ppm 19013 36th ave. west suite h lynnwood, wa 98036, usa frequency stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration a nd load (425) 776 - 1880, fax: (425) 776 - 2760, ple - sales@pletronics.com, www.pletronics.com 25 jan 2002 pl tronics, inc. mechanical: not to scale inches (mm) vc22h=without e/d vc32h=with e/d x: 150 ppm y: 200 ppm z: 300 ppm operating temperature range a: 0 to +50 c b: 0 to +70 c c: -10 to +70 c d: -20 to +75 c e: -30 to +75 c f: -40 to +85 c 25: 25 ppm 50: 50 ppm 100: 100 ppm 15: 15 ppm supply voltage blank= 5.0 volts 5% 3= 3.3 volts 5% vc3 enable/disable option (e/d) output enabled when pin #2 is open or at logic ? 1 ? ; output disabled when pin #2 is a t logic ? 0 ? . 60.001 ? 200.00 consult factory for values vc3 solder pads vc2 solder pads packaging tube or 24mm tape 16mm pitch due to part size and factory abilities, part marking may var y from lot to lot and may contain our part number or an inte rnal code. 1.500 mhz ? 200.00 mhz .400 (10.16) max .560 (14.23) max vcc * vc22h: pin 2 n.c. (do not connect to pin 2) gnd out 4 5 6 3 2 1 ple 4 .200 (5.08) 5 1 2 n.c. vcon 3 6 .195 (4.95) max .23 (5.8) .05 (1.3) .12 (3.0) * vc32h: pin 2 e/d * 4 .200 (5.08) 1 3 6 .23 (5.8) .05 (1.3) .12 (3.0)
|
